Do you have the PSU power connector plugged into the GPU ? If so, load up a game and see if the fans kick on. Im running a 3060 in my ttx3 ( unlocked bios, atrax image ) and don't have any issues
No. I replaced the resistor array that coincides with the P1B6 / HK input , but this was not the culprit. It’s perhaps the 2929 custom IC, but I’m not certain. Hopefully someone makes a reproduction ship or is willing to sell me one from a broken board or something at some point down the road...
What's strange is that I started with two non working inputs but now after cleaning the board a bit with IPA the 1P coin now reports "0" in the test menu and functions properly in game as well now. I checked continuity between each wire in the cps2 kick and the resistor array but I'm not sure...
Player 1 Coin 1 was also stuck on initially. Cleaning the jamma edge remedied that input. P1B6 stays on regardless whether the kick harness is attached or not. That was one of the first scenarios I tested for.
I’ve got a cps3 that appears to work properly except for the player 1 heavy kick P1B6 . In the bios test menu it is stuck with a “1” value. I’ve tried cleaning the jamma edge with isopropyl, I’ve tested the board on two different cabinets with working controls but still no luck. I was able to...
He finally responded once to my dm a month ago apologizing saying he’d ship my order asap after not responding for months . Haven’t heard from him since . It’s not a huge amount of money or anything but it’s not exactly an ideal situation either. Hopefully he’s alright .