Recent content by FrancoB

Ha! Thanks buddy. Your cheque is in the mail ^^ I'm afraid I don't offer a major wiring service any more, I just do the odd job here and there. @Lemony Vengeance comes highly recommended though, I'm not sure if he does JAMMA looms however? You're link didn't work for me but I presume you...

I don't use AWG wire. I buy metric wire that is displayed with the stranding, i.e. 16/0.2 is a wire made up from 16 individual 0.2mm diameter strands. A 24/0.2 wire is made up from 24 0.2mm strands. For reference 16/0.2 is equivalent to 20AWG, 24/0.2 is equivalent to 18AWG. There is a handy...

I have to say I don't think that looks like a particularly good JAMMA harness as it is. It's only $10 though so you can't expect much. The main issue is there is only a single wire connected to the four 5V pins which is going to limit the power you can supply to your PCBs. You could much improve...

Rather than a nut I would probably make a recess to hold a stack of low denomination coins. Nuts do not have that much mass but a stack of the largest diameter coins that would fit would probably give you the most mass/bang for your buck, pun somewhat intended ^^

Yes, it's the only one in the ones above that is three layers. (Black back, white 'outline' and then pink or green on top). I could either have inlayed or stacked the white and pink/green parts. I decided to do the latter to give it a bit more depth plus inlaying it would have wasted 90% of the...

Sure, shouldn't be too much of a problem. Feel free to add some notes to the order form and we can discuss via email :thumbup: I can get various mirrored acrylics and I have some brushed steel too. Another option would be to use something like 'Midnight Black' which is a nice matte black if...

I'm afraid it's not something I'm going to be able to do in this series. Logos like that have multiple colours/gradients on a single piece and I'm mainly limited to working with flat colours. Manufacturer logos work well as they use flat colours by design but game logos tend to be more complex...

Thanks all! ^^ The order form is up [here]. I've left it fairly basic as there is no way I can capture all of the options/sizes etc. There are just a couple of sections to leave your requirements and email address. I'll then be in contact to discuss what you need.

I don't use them all the time but they do have their place. I made one a while back which was loosely based off of one of Vector3Ds earlier versions. I used a linear rail on the front to give flexibility for mounting other tools. I would definitely pick up some of the tips rather than a...

Funnily enough I have a CO2 laser now so I could cut them for you. I even have some of the same material that I used in this project 8) Shoot me a PM if you want to discuss.

Just to get a thought down whilst its in my head, something like this might look good if you wanted both.... MS Paint skillz ahoy! Green LEDs on the top/bottom that curve round the edge and two pink strips on the sides.

Love it! That would indeed look fantastic. I'm more than happy to work on custom stuff, that's where the fun is ^^ I do have some brushed stainless effect acrylic in stock currently, it might be a little dark but there are other silver options I can get. I've got a swatch of about 120...

Cheers bud. This was semi-secret plan #2 of [REDACTED] ;) The controllers I got were meant to be supported by various devices but it was LIES. I'm going to look at some others. Cheers guys! I'm really happy with how they've come out and it's been good fun learning some new skills along the...

I've been working on various game room signs for myself and others recently: View: https://www.youtube.com/watch?v=___Qxkp3W0o High res images of the above can be viewed in [this] gallery. Signs are made from high quality cast acrylic. The backs are typically 5mm with 3mm detailing on...

Great freebie! Kudos! :thumbup: