Recent content by jaythurm

I would recommend changing out the glass to a clear glass. Just take the orginal glass to the glass cutter so they can find the correct thickness and measure correct height and width. The glass that was originally used is tinted for glare reduction which I don’t have that issue in my house plus...

*Have you wired in the monitor so it turns on when the machine is powered on? Yes the acer has auto boot and auto detection of hdmi. When powered on. I’m not using Lindbergh power supply nor the power transformer. I have a 120w power strip that everything is connected to that goes into the...

I’ve upgraded cpu, case and ppu fans on 2 Sega ring edge 2. For the cpu I just broke 2 pins holding old fan, then slide in the new fan and hot glue / super glue the fan to the old housing. Dont forget to double check fan 4pin pvm convert to 3pin / 2pin

I finally have the Lindbergh yellow to boot into the correct menu due to missing "os.001-os.004" on the ssd. Before the system would boot to "Multi" screen for 4 seconds reboot then loop back Now I get this message ".menu.sh line 243 and 256 too many arguments" when the menu is loaded. This...

Its going to take a lot of Peroxide to retrobrite this front panel on the Sega new net city. I think I'm just going to have this painted using a spray gun. I will need to tear everything down and prep it with sanding, bondo for cracks and primer. This cab I am going to keep 100% original using a...

Last touches to the Lindbergh and it’s done. Instructional space came in from Olly over at Arcade art shop! The top card has been updated to the OEM card which I found on yahoo auctions Japan (Shipping was not cheap) and the final touch: Sega emblem for the monitor bezel. Updated the brooks...

Went to a glass maker to change out the non reflective glass to clear. He only charged me 50$ which was half of what I was quoted online and other local shops near me. I upgraded the monitor from the original Toshiba 32in led to a Acer 4k OLED predator. Audio was upgraded to a Fosi Hifi 2...

is the "Original Marquee Holder" still available?

Pulled out the 1080p Toshiba monitor. Replacing glass with full clear glass, no need for anti reflective glass when i am upgrading the monitor to HDR. Top banner fully added.

https://a.co/d/30WKksP I went with the "Acer Predator X32 X3 ". I wanted G-sync and 240hz on 4k. The LG 32 oled was too bulky on the backside to fabricate with the original brackets.

Painting the aluminum parts finished and gloss black for the panel. New casters added. Console fully cleaned and keys added

Prepping for painting and cleaning. Speakers needed a deep clean along with entire body. The wrist bar had deep scratches from watches, I couldn't polish this, so I needed to add metal bondo and sanding.

Polishing parts. Decided to go with the Sega astro city button color theme instead of the Lindbergh gray

Recently picked up a Sega Lindbergh and Sega New Net City, this is my first arcade cabinet and restoration on an arcade cabinet. My goal is to upgrade the screen to 32in 4k OLED, brooks fight board and ps5/ pc support and all lighting upgraded to LED. The cabinet arrived was in semi rough shape...

First of all, thank you for adding me to your forums! I have 2 projects I am currently working on: Sega Lindbergh and a Sega new net city. Lindbergh I plan on upgrading to a 4k panel with ps5 support and Pc with new parts. Sega new net I plan on keeping original. New caps for monitor and psu...