Recent content by xodaraP

  1. X

    NON-CRT Displays that support 15KHz and 25KHz resolutions

    Unusual for a late model widescreen monitor to support 15k - that’s a good find
  2. X

    NON-CRT Displays that support 15KHz and 25KHz resolutions

    NAOMI in 15k will tell you if the monitor can sync 15k But if you’re running an LCD you should be running 31k for NAOMI even if the monitor supports 15k
  3. X

    Identifying Atomiswave Motherboard Mod

    I’ll open mine and have a look at the internals. That sub board reminds me of the small PCB on CPS3 boards and it’s related to clock/timing Could we maybe determine some central data points to try and narrow down the issue? Issue observed: Is issue repeatable/consistent: Board serial...
  4. X

    I need a CPS3 case.

    There are services to help international users buy from there - but I assume some sellers don’t allow it
  5. X

    I need a CPS3 case.

    A few of us saw that acrylic CPS3 case on Taobao but when trying to order through a proxy service like Superbuy the order got rejected. It looks really nice
  6. X

    Australian Roll Call / Registry / Deals Thread

    +1 for TD-IO They work very well and they’re a lot more compact than the Capcom IO
  7. X

    Australian Roll Call / Registry / Deals Thread

    Any Aussies have a Dreamcast console sitting around they would like to sell? Looking for something to refurb so as long as it boots, not worried if it has a damaged/yellowed shell or otherwise looks ugly. Don’t need a working GD-ROM unit Would prefer a PAL unit if possible
  8. X

    [Released] Open Source Neo Geo MVS Marquee Driver

    Hi, thank you for your interest in the project! Apologies I haven’t posted a more recent update. A scratch build 4 slot will be an awesome build Yes I have fixed it - there was a minor issue where I forgot a trace for the ground loop. I found it and reworked the boards I have to confirm the fix...
  9. X

    Darksoft Neo Multi Help thread

    What power supply is being used? A lot of CMVS units use not great power bricks that may not be providing enough current - or the regulator isn’t keeping it at close enough to 5v I would assume the multi cart will be more sensitive to bad power than an original cart since it is bringing down...
  10. X

    WTB CPS2 multi pins (long pins for main board)

    I’ll check but I think I used all the spares I had How many do you need?
  11. X

    DARKSOFT The Definitive Guide to Fixing Your CPS2 Multi Kit

    Without a working A and B set there is no way to tell for sure. But given the damage to your B board that would be the starting point
  12. X

    DARKSOFT The Definitive Guide to Fixing Your CPS2 Multi Kit

    If you have another B board you can use for the multi that would be the way to go. That board needs to be sent to someone who can check it over and repair it The battery damage isn’t bad and I think it will be salvageable. Looking at it briefly - D1 is missing - D5 is corroded and very...
  13. X

    Sega CD Model 2 - metal ring on spindle

    I think it will snap into the plastic ring, you don’t want to use glue because that will modify the weight/balance of the spindle At least if you buy from the Aliexpress seller you get 5 attempts at making it work
  14. X

    Sega CD Model 2 - metal ring on spindle

    I was thinking you could just remove the metal ring that he needs from the PS1 spindle and put it on the Sega CD spindle instead
  15. X

    Sega CD Model 2 - metal ring on spindle

    You can get them for a PS1 and they should still fit. Not sure if you’re affected by the tariffs yet but these still shouldn’t be too bad https://a.aliexpress.com/_mPlaT0R
Back
Top