Search results for query: *

Hi! :) Does anyone have a dump of the Japanese Live Monitor software DVDs, or a link ? Thanks. :thumbup:

Hi! ;) Following a 2019 article on Arcade Otaku, I wanted to thank Leonard Oliveira :saint::thumbup:, who had highlighted this Mode at the time. So I resumed my testing, which I had interrupted a few years earlier. While searching, I realized that the crystal oscillator in my Scud Race was...

Hi! :) I came across a post where someone posted a list of NvRAM files with unlocked characters. https://www.reddit.com/r/MAME/comments/n2rewt/useful_nvrams/?show=original It seems to work on the original ZN hardware by programming the Atmel AT28C16, I'll check it out anyway. Not all the...

Hi! :) If anyone could work on an unlimited IC card for Tekken 5, Tekken 5 DR Japanese and Chou DBZ and other compatible games, thanks to him :thumbup: There are tens of thousands of readers on this site, it takes too long to look at those :Sused in the Arcade equipment...

Hi :) ! I'd like to perform a permanent repair on this problematic video card. But to avoid having to start over in a few months or years X/, I'd like to create a PCB reinforcement system. The problem is that I have no knowledge of 3D modeling.;( However, I'd like to ask for help from forum...

Hi! :) There, I finally found my Holy Grail after 25 years of searching 🐌🐌🐌🐌😋 I said I would retire the day I found it, bet kept at 47 years old 🐌👨‍🦳😅 Unfortunately, it is not functional, the Graphics Card BGA cracking PCB bending by heat.🐌😭😓 To know that there is a 1 in 5 chance that it...

Hi! :) I wanted to know if anyone was able to get Ridge Racer V to work on a Namco System 246 model C and an MP07-IONA-US JVS ? THANKS :thumbup:

Hi :) Here is my little first repair for 2025 ^^ Color problem The red is missing, the 102 & 202 SMD resistor was oxidizing, they no longer made contact on the pads. I had a Ram problem so I changed them :) GPU reflow Pâté style, basically I had to dismantle everything X/ it was tinkered...

Hi! :) Does anyone have a list of capacitors for this mode l? THANKS :thumbup:

Hi! :) I have a problem with a Mr Driller G Namco System 10 On startup black screen but with a switching noise as if it was trying to display. All the LEDs on the PCB are red, the whole game has undergone a new capkit, the PCB is clean, no cut tracks, no corrosion. I checked all the CPU pins...

Hi ! :) I have a glitch & freeze problem on this PCB ;( No corrosion or broken track The PAL 4040 had 2 broken legs and soldered directly on its socket like a pig. I programmed a GAL with Dump file, so far it works. But after 5 minutes, some graphic bugs appear for this grow over time...

WHAT? the Chinese community manages to make bootlegs and also crack the CAT702 and today still no Multi-ZN X/ :whistling: https://www.ebay.com/itm/205085103726?mkevt=1&mkcid=1&mkrid=711-53200-19255-0&campid=5338722076&customid=&toolid=10050

Hi! :) I am preparing a Motherboard for a future Multi-CPS1 of a Person. :saint: I have a sound problem, like a snare drum effect, no bass in the game and the sound of the Go! is acute. X/ I tell myself that perhaps the OKI 6295 Audio Mixer must have taken a beating as usual. X( But during...

Hi! :) I have a compatibility problem with the JVS Versus Sega & Power Stone 1 Naomi kit. || I have no control over the New Net City Cab configured as Master, even the Setup button on the cabin does not work. :S Everything is managed on the New Net City Cab configured as Slave, it's crazy X/...

Hi! :) Before burning everything X/, I prefer to ask the question :saint: Can I connect an Arcade system to the CN5 USB Type-A connector on the I/O board with a USB A-to-A cable ? Thank you :thumbup:

Hi! :) the Audiophiles :D you noticed that the little music interlude after the character's action jerks like a decompression, not fluid, like a bottleneck, I always found it weird. This does it on a 10MHZ motherboard and a 12MHZ Dash. :S do you know where this could come from :?: A 1 minute...

Hi! After a month of research and endless nights, found the fault that prevented the game from starting a cut track under on the PCB at the Simm Connector. There was also corrosion in certain places on the PCB. The game works now, but my graphics are not very good in terms of pixel...

Hi! :) I found this, this chip equips the Capcom ZN2 motherboards :thumbup: https://www.ic-cracker.com/altera-cpld-epm7064qc100-12-eeprom-pof-program-replication/

Hi! :) I would like to know ,if it is compatible and what eprom model was used since most sockets are 42 pin and on what location ? THANKS :thumbup:

Hi! :) I just dumped IC12 & IC13 from a Romboard without Keycus which normally and from a Tekken 3 to Soul Calibur (SOC14/VER.C) but I have the impression that it happened in the opposite direction to Tekken 3 towards Soul Calibur (SOC14/VER.C) and returned Tekken 3 :whistling: If anyone can...