LG Philips Tube Needs Chassis and Neck Board

[Esom]

I've got this tube, an LG Philips A68QCU770XV6L. It had no neck board or chassis when I received it. Looking up the cabinet in its original form it seems it had a WG D9400 and neck is listed as B10-277. Are these hard to come by? I don't see any for sale here or on eBay.

Are there other compatible chassis I could use?

 

[trashedcabs]

Can you get yoke inductance readings? I may have a chassis that will work with that yoke and tube.

 

[Esom]

I haven't tested my own yoke, but from another user here with the same tube the readings were:

Lh	Lv	Rh	Rv
0.29 mH	7.82 mH	0.6 ohm	5.9 ohm

I don't know how different they are from one set to the next, so if that's not sufficient I'll have to test in the morning.

 

[trashedcabs]

Mostly I want to make sure the yoke is actually from that monitor, and not a random TV someone dropped in for some reason. I don't want to say "hey hook this up" and then have it blow the horizontal section because of the wrong yoke. Can't make assumptions.

 

[Esom]

I'm not sure my cheapo multimeter can test inductance directly, but the numbers I'm getting when testing the coils for continuity are

H: 0.4ohm
V: 5.3ohm

Guess I need a better multimeter before moving forward?