What's new
By:

WTB SEGA AERO CITY SERVICE DOOR X 2

Want To Buy
SC-Ultra

SC-Ultra

Professional
Joined
Sep 10, 2022
Messages
168
Reaction score
228
Location
Ferndale, WA
Looking for two aero city doors so I can finish my project cabs. I tried ordering from yaton and was sent doors from a sega astro or blast city I believe but ignored after that. Not picky on condition just no drilled lock holes. Thank you.
 
Bump, also consequently if anyone needs two astro of whatever this door belongs to let me know. You would definitely want to powdercoat them but hey, a doors a door.

IMG_1634.jpg
IMG_1635.jpg
 
Last edited:
What size is the service door you need? My blast city came with one that is incorrect and too wide W: 12(1/2)" by H: little less than 18". Don't know what it goes to. Man and I was about to buy from yaton too but don't want to get the wrong door.
1000026156.jpg

1000026131.jpg
 
Desert_Dweller_88 said:
What size is the service door you need? My blast city came with one that is incorrect and too wide W: 12(1/2)" by H: little less than 18". Don't know what it goes to. Man and I was about to buy from yaton too but don't want to get the wrong door.
Click to expand...
Thanks, I actually saw your post on KLOV which is what prompted me to measure them as I thought I might be able to help you out but looks like these are astro doors, wasn't sure until I saw your blast. That said, no idea what kind of door you have there. My advice would be just order the door from yaton if money isn't tight, doors are hard to find, you got a 50/50 shot. Pay the little more for the DHL shipping.
 
Honestly at this point with yaton's track record, I'll probably 3d print one and wait for a confirmed service door. With primer and paint, don't think anyone would be able to tell the difference 😂
 
I guess I'm not joking anymore. I have half a door now, should be a full one by tomorrow. But this is "Prototype A". There will be a revisin B after this.
1000026206.jpg

1000026207.jpg


1000026208.jpg
 
Desert_Dweller_88 said:
What size is the service door you need? My blast city came with one that is incorrect and too wide W: 12(1/2)" by H: little less than 18". Don't know what it goes to. Man and I was about to buy from yaton too but don't want to get the wrong door.
Click to expand...

This is an Astro City door, I just measured mine to check.

SC-Ultra said:
Bump, also consequently if anyone needs two astro doors (I believe?) let me know. You would definitely want to powdercoat them but hey, a doors a door.
Click to expand...

I don't know what these doors are from. They are too square and wide to be for an Astro or Blast. Visually, they look like an Aero door, but I don't own an Aero yet to verify.
 
You must log in or register to reply here.
Back
Top