What's new
By:

Astro City Mahjong Panel holder

buffi

buffi

JONGBOIS
Enlightened
Joined
Aug 12, 2019
Messages
1,266
Reaction score
2,901
Location
Sweden
Gotta have a panel for the supergun.

Took like 16h per endpiece despite printing at 120mm per seconds.
Some slightly uneven parts, but overall happy with it!

090C4926-DC25-40E3-B451-8A7F52C822CD.jpeg


E747284B-1B17-44E5-8994-560440A9C52F.jpeg
 
That's so awesome Buffi!

I used to use a Blast panel for a similar setup. Then the brain worms dug in harder and now I just have jong cabs.

PXL_20210222_235021899.jpg
 
Ah. Another man of culture.

Yeah I have a jong panel for my cab too, but wanted to do something with my extra panel, so thought why not throw together something :)

Will post stl files later
 
werejag said:
that looks pretty damn nice
Click to expand...

Thanks. There’s some imperfections, but overall I’m happy with it. Some of the edges are uneven, due to having to print them with support, and me printing at basically 3x the normal speed I use. Could sand them a bit maybe. Would be better to have these designed to not need support, and ideally printing at a slower rate but I dont care too much :)

Pic that shows what I mean:
1A1B130B-9D0E-4A10-A183-9B50597F5F76.jpeg
 
Awesome project! Is it possible to get the original design files? (hopefully in fusion 360 :D) - have some changes in mind :)
 
Orakelschaf said:
Awesome project! Is it possible to get the original design files? (hopefully in fusion 360 :D) - have some changes in mind :)
Click to expand...
Sure why not.
http://img.buffis.com/3d/Astropanelstuff.f3d

Note that I'm still pretty much a beginner at fusion 360, and I was even shittier at it in 2022 so don't expect things to have been done in a sane way that makes sense.
But there ya go!
 
You must log in or register to reply here.
Back
Top