What's new
By:

FS interest check custom made to order atx to naomi power cable

For Sale
werejag

werejag

Grand Master
Joined
Aug 12, 2015
Messages
1,113
Reaction score
278
Location
okc, ok
atxnaomi.jpg
 
I like the idea of the switch, I'm assuming it's an on/off switch to kickstart the PSU (connect green and ground)?
 
outside usa ive not done in a while. can i do that all online? like print forms etc
 
I literally just made one of these today. RIP

I'll almost certainly have a need for more later down the line, and these look nice! I'll keep it in mind :)
 
I'd be interested in one and if you could make an extra splitter on the cable for capcom io in it as well I'd definitely get one
 
i have no idea if the capcom I/O conector can be gotten. im willing to make them extra if i can find what pinout and if the conectors are available
 
Capcom I/O is powered through the JAMMA edge connector. So if you were to use this harness power the Capcom I/O, then just split 5v and 12v off the back of the Naomi JST power connector pins and leave them as lead wires. The user will then have to splice the lead wires into their Jamma harness.
 
what is the 6 or 8 pin conector on it? o looks like its to power the naomi?
 
werejag said:
what is the 6 or 8 pin conector on it? o looks like its to power the naomi?
Click to expand...
Yeah, that is exactly what it is: power connector for the Naomi.

Capcom I/O is basically a conversion kit. Allowed operators to retrofit existing JAMMA standard cabs so they work with the Naomi. Power is drawn from a standard arcade PSU. Those only have 5v and 12v. Then it takes part of that power, converts it to 3.3v which is what the Naomi needs, and outputs that 3.3v along with the standard 5v and 12v through that connector you are talking about to the Naomi.

So if you need to make this connect to a Capcom I/O, leave lead wire hanging out the back of the power connector to the Naomi (or the ATX connector) for 5v, 12v, and GND. The user will have to then splice that lead wire it into their JAMMA harness. The JAMMA harness powers the Capcom I/O through the edge connection.
 
You must log in or register to reply here.
Back
Top