Sf2 ce C board with bad teared parts

[MostroVeneno]

Hi folks!



I have an sf2 ce working pcb, but it reboots often.
I really dont know much about electronics. I have spoted these components in bad form and was wondering if can be part of the problem and if can be replaced or fixed?

So the first image is actually my c board with that detail.




The second picture would highlight (in yellow) wich parts and where they are, cause i didnt take pic of the other broken part ( i think a ceramic capacitor just on top of the b21 processor??)



I apreciate any help or leads on this.

 

[twistedsymphony]

it's called a Resistor Array (or Resistor Network)

you'll have to determine the model from any markings on it (or maybe someone knows?), or simply using a multi-meter. Sometimes you can get replacements, sometimes not. Worst case you can replace it with normal resistors which is ugly but works.

 

[MostroVeneno]

Hi @twistedsymphony thanks for the reply!
I´ll try to find it. Do you know if can be the problem for the rebooting?
Also, the other part above the b21 is a cap? also replaceable?

 

[twistedsymphony]

I don't know.

your Resistor Array looks like it's cracked though so best to replace that first and then reassess.