What's new
By:

FS Working Recapped Monitor Chassis - Neotec NT-550DX, Kortek KT-2914, Sanwa 29E31S

For Sale
T

trashedcabs

Grand Master
Joined
Aug 18, 2023
Messages
336
Reaction score
594
Location
WA, USA
Have an excess of random chassis here I need to get rid of, all serviced and working. All prices are including shipping in the US, everything OBO and can give a discount for multiple.

Would trade for MVS carts.

Sanwa 29E31S: Recapped, just ran it for 72 hours at a convention before upgrading to a PFX chassis :). $250 SHIPPED
Kortek KT-2914DF: Recapped, rebuilt vertical section, replaced flyback (used fly). This is the single focus version of this chassis. $200 SHIPPED
Neotec NT-550DX: Recapped. $200 SHIPPED

I also have a Neotec NT-27E which has been rebuilt, but I have had TWO of the APAR repro flybacks fail on me and I'm sick of dealing with it. So it's working but has no flyback. $80 SHIPPED

I may add more chassis to this post as I dig them out.
 

Attachments

  • photo_2025-05-28_20-47-34.jpg
    photo_2025-05-28_20-47-34.jpg
    294.3 KB · Views: 49
  • photo_2025-05-28_20-47-35.jpg
    photo_2025-05-28_20-47-35.jpg
    288 KB · Views: 40
  • photo_2025-05-28_20-47-37.jpg
    photo_2025-05-28_20-47-37.jpg
    300.4 KB · Views: 46
If you come across any working Neotec NT-S501 chassis, I’ll take one.
 
Bump, still have these. Will have a few more chassis added shortly once I have time to dig them out and test them.
 
Wouldn't happen to have any 29in tubes would you? Also if any of those chassis are ms9 or tri sync let me know!
 
astro_zombie138 said:
Wouldn't happen to have any 29in tubes would you? Also if any of those chassis are ms9 or tri sync let me know!
Click to expand...

I mean maybe, but I'm across the country lol. Is your tube dead or missing or something? If you need a complete monitor I would personally just scope out your local FB marketplace and see if you can pick up a game to pull the monitor from and then scrap the cab or resell with an LCD in it.

The Kortek 2914 is trisync and should work on the MS9 tube and yoke. I also have a Neotec NT-500DX I'm waiting on parts for which is trisync and should work.
 
trashedcabs said:
I mean maybe, but I'm across the country lol. Is your tube dead or missing or something? If you need a complete monitor I would personally just scope out your local FB marketplace and see if you can pick up a game to pull the monitor from and then scrap the cab or resell with an LCD in it.

The Kortek 2914 is trisync and should work on the MS9 tube and yoke. I also have a Neotec NT-500DX I'm waiting on parts for which is trisync and should work.
Click to expand...
I've had a couple 25in shipped to me before. Always worth a shot asking :D The tube has annoying burn in my Astro and I'm just reaching out kind of randomly hoping to score one. Haven't had much luck local. I'm getting a donor tube tomorrow but I'm not sure it'll work for the ms9 so I was keeping an eye out for other possibilities since the tube is known to work with ms293x.
 
astro_zombie138 said:
I've had a couple 25in shipped to me before. Always worth a shot asking :D The tube has annoying burn in my Astro and I'm just reaching out kind of randomly hoping to score one. Haven't had much luck local. I'm getting a donor tube tomorrow but I'm not sure it'll work for the ms9 so I was keeping an eye out for other possibilities since the tube is known to work with ms293x.
Click to expand...

I've done a few MS9 tube and yoke swaps with mixed results, namely because the curvature of the Toshiba tube is a little more round than most TV tubes, so expect static convergence to be off even after adjustment. Usually you can dial it in so it looks acceptable at 15khz progressive, just don't expect perfection. You'll also probably have to remove the rubber wedges and reposition to get decent purity.
 
You must log in or register to reply here.
Back
Top